32
PM PRODUCTS
PM
PM
FilterWavelengthdiviSionMultiPlexerS
• Low Insertion Loss
• High Return Loss
• High Isolation
APPLICATIONS
• Fiber Optic Instruments
• Raman Ampliers
• EDFAs
• Fiber Sensors
Senko PM lter WDM series provide wavelength division multiplexing while maintaining signal polarization, which
is ideal for high speed WDM network systems.
Note:
1. Above specications
are for device without
connector.
2. For devices with
connectors, IL will be
0.3dB higher, RL will be
5dB lower and ER will be
2dB lower.
3. The PM ber and the key
are aligned to the slow
axis.
PARAMETERS
1,2
VALUES UNIT
Pass Band
Wavelength Range
1270-1350(1530-1600) 1450-1490(1530-1600) 1500-1520(1530-1570) nm
Typ. Insertion Loss
0.4 0.4 0.5 dB
Max. Insertion Loss
0.6 0.6 0.7 dB
Typ. Isolation
30 30 30 dB
Min. Isolation
25 25 25 dB
Reection Band
Wavelength Range
1530-1600(1270-1350) 1530-1600(1450-1490) 1530-1570(1500-1520) nm
Typ. Insertion Loss
0.3 dB
Max. Insertion Loss
0.5 dB
Typ. Isolation
15 dB
Min. Isolation
12 dB
Min. Extinction Ratio
20 dB
Min. Return Loss
50 dB
Thermal Stability
≤0.005 dB/°C
Max. Optical Power (CW)
300 mW
Max. Tensile Load
5 N
Fiber Type
3
PM Panda Fiber
Operating Temperature
-5 to +70 °C
Storage Temperature
-40 to +85 °C
Package Dimension
5.5 (Ф)x35(L) mm
ORDER CODE example:
P D - P M F W D M - 4 8 5 5 - 1 - B - S
CODE WAVELENGTH
CONNECTOR TYPE
ON PORT 1, 2 & 3
FIBER JACKET
ON PORT 1, 2 & 3
FIBER
LENGTH
PD-PMFWDM
3155 1310nm Pass/1550nm Reect 0 None B 250μm Panda Bare Fiber Q 0.75m
5531 1550nm Pass / 1310nm Reect 1 SC/UPC D 400μm Panda Bare Fiber
4855 1480nm Pass / 1550nm Reect 2 SC/APC L 900μm Loose Tube with 400μm Panda ber
5548 1550nm Pass / 1480nm Reect 3 FC/UPC T 900μmLoose Tube with 250μm Panda ber
5155 1510nm Pass / 1550nm Reect 4 FC/APC
5551 1550nm Pass / 1510nm Reect 5 LC/UPC
6 LC/APC
7 MU/UPC
Comments to this Manuals